UKLA

Profile system for visible fixing of large and small-format ceramic facade panels, e. g. sized 40 x 40 cm or 60 x 60 cm, with brackets.

A sub-structure system based on UKLA is comprised of vertical aluminium L-shaped support profiles, wall brackets and optional accessories. According to their thermal loading and demands – wall brackets are made of aluminium, stainless-steel or glass fibre reinforced polyamide.

The cladding elements are secured to support profiles using clamps and brackets. They are arranged in such a way, that they are located behind every vertical joint in the panels.

Carrier profiles are connected to the wall brackets using screws, bolts or rivets. When doing this, the horizontal sliding points take up horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead loads). Constraint-free assembly is achieved at the sliding points in vertical longitudinal holes. One fixed point is allocated for each support profile.

Wall brackets can be fitted with an optional assembly aide, in order to simplify working with them, which makes fixing and holding possible for the support profile.

Thermostop Elements are available as thermal dividers to minimise thermal bridging effects.

Protrusions up to 480 mm.
Material EN AW-6063 T 66
Aluminium T-shaped profiles
T 65 / 50
T 80 / 50
Technical Drawings see here
Suitable wall brackets see here
Accessories see here
This profile system is suitable for use with cladding materials including

Agrob Buchtal, Cerashield, Florgres, Imola, Marazzi, Mirage und Mosa.