ALWI-V-B

Profile system for concealed fixing of Agrob Buchtal KeraTwin K20 facade panels.

A sub-structure system based on ALWI-V-B is comprised of vertical aluminium carrier profiles, wall brackets and optional accessories. According to the thermal loading and requirements – wall brackets are made out of aluminium, stainless-steel or glass fibre reinforced polyamide.

The cladding elements are fixed to the support profiles using brackets or a system rail.

The support profiles are connected to the wall brackets using rivets or screws. When doing this, the sliding points take up horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead load). Constraint-free assembly is completed at sliding points in vertical longitudinal holes. One fixed point is allocated for each support profile.

The wall brackets can optionally be fitted with an installation aide, which makes fixing and holding possible for the wall profile, which makes it easier to work with.

Thermostop Elements are available as thermal dividers to minimise the risk of thermal bridging.

Protrusions of up to 480 mm.
Material EN AW-6063 T 66
Aluminium T-Profiles
T 65 / 50
T 80 / 50
T 100 / 50
Technical Drawings see here
Suitable wall brackets see here
Accessories see here

ALWI-V-B with clamps

ALWI-V-B with profile system rails

This profile system is suitable for use with Agrob Buchtal facade panels.