UBE 25
Material – EN AW – 6063 T66

Holding tracks for installation of large- and small-size cladding panels with concealed fixing on the reverse side, e.g. ceramics, natural stone, gypsum boards, HPL boards, glassfibre concrete, glass.

Holding tracks for concealed installation of large-size cladding panels, e.g. laminated hardboards (TRESPA®). Basis of this system are SYSTEA® holding tracks type ALWI. For buildings of which the outer walls are not suited as fixing basis, use SYSTEA® ALKAPO holding tracks.

The holding tracks consist of vertical base tracks, e.g. SYSTEA® ALWI or ALKAPO on which horizontal tracks are placed corresponding to the intervals of the cladding panel grid. Per cladding panel, you need min. two horizontal holding tracks. On the reverse side of the cladding panels, holding brackets are fixing for insertion into the holding tracks.

The cladding panels are hung by holding brackets which are fixed on the back of the panels by special plugs or non-expanding rivets and anchors. Height adjustment of the panel is made by an adjustable screw.

Statical proof is given by SYSTEA® for each project individually.

Types

  • UBE 25 for HPL, ceramics, stoneware, composite concrete panels, natural stone and glass
  • UBE 25 S for small unit depths and interior use
  • UBE 25 Tergo for Eternit and gypsum boards
  • UBE 25 Tergo S for small unit depths and interior use
  • UBE 25 NG2 for all types of facade cladding

Consoles / Brackets

According to your selection, the following parameters are possible:

  • thermal efficiency: A+ to A
  • fire protection classification: non-flammable
  • up to 400mm reach (possible extension up to 200mm)

> To select the consoles / brackets

Profiles of base Holding Tracks

  • T-profiles: T 40/55, T 40/70, T 65/50, T 80/50 and T 110/70
  • custom profiles possible

UBE 25 profiles

  • Horizontal holding bracket profiles
  • Brackets fixed
  • With adjustable screws
  • With adjustable and fixed screws

Accessories

  • Outer corner profiles, angular
  • Ventilation angles for lower facade border
  • Water stem profiles
image/svg+xml

UBE 25 (12)

Holding Tracks for flat wall panels

image/svg+xml

Installation

image/svg+xml

UBE 25 (19/2) with TEKOFIX console

Holding Tracks without thermal bridges for flat wall panels (concealed fixing)

image/svg+xml

Installation

image/svg+xml

UBE 25 NG2 (13)

Holding Tracks for flat wall panels

image/svg+xml

Installation

Contact